

Sculpture tablelighter - Black
599,00 DKK
EN | DK
Sculpture has an iconic design that displays itself beautifully in the modern home.
The long neck allows lighting of lanterns, candles and where it is difficult to reach the wick.
With its elegant and ergonomic grip, Sculpture is easy to use and lights with a simple ’squeeze’ – for your enjoyable user experience.
The table lighter has an easy adjustable flame, is refillable and equipped with a ’jet-flame’ technique to ensure a strong and straight flame.
Sculpture is particularly suitable for lighting fireplaces, lanterns and other sources with limited or narrow access to the wick.
The table lighter is useful in any home and an obvious gift item for any occasion.
Refill of gas
Gas filling must be done outside or in a well-ventilated room and do not smoke at the same time.
It is best to refill the table lighter when it is completely empty. Press the filling valve with the tip of a pointed object until there is no more pressure in the table lighter. Then it is ready to be refilled.
Turn the adjusting knob as far down as possible (-). Hold the gas refill and table lighter straight above each other with the valve of the gas refill pointing vertically down at the table lighter. The table lighter’s filling valve is facing upwards. Then connect the gas refill valve to the corresponding opening in your mignis table light.
Press the gas refill with an even constant pressure and remove it after two seconds of filling – refill again for two seconds. Repeat this procedure if necessary. Wait approx. 1-2. minutes before using the table lighter again to let the excess gas evaporate. Now the table lighter is ready for use and the flame can be readjusted to the preferred level.
To avoid air to enter the sealed gas tank, please make sure the gas refill and the table lighter are held vertically during the filling process. This will prevent a potential vacuum of air that will affect the use of the table lighter.
Lighter gas is flammable and ice cold when it gets out into the air during filling – please be careful to keep away from your skin.
Sculpture er et stærkt formmæssigt ikon, der præsenterer sig smukt og skulpturelt i det moderne hjem. Den lange hals muliggør antænding af lanterner, stearinlys og hvor det er svært at komme til.
Sculpture ligger ergonomisk godt i hånden og tændes nemt med et enkelt ”klem” på den bløde trykknap, hvilket giver en lækker brugeroplevelse. Bordlighteren har justerbar flamme, kan genopfyldes og er udstyret med ”jet-flame” teknik, som får flammen til at stå lige og stærk.
Sculptures form egner sig godt til at antænde pejs, fyrfadslyset i en lanterne eller andre levende lyskilder, hvor der ikke er direkte adgang til vægen.
Brugbart i ethvert hjem og en oplagt gaveartikel til enhver lejlighed.
Påfyldning af gas
Påfyldning af gas skal ske udenfor eller i et godt ventileret rum og undlad at ryge ikke samtidig.
Det er bedst at påfylde bordlighteren, hvis den er helt tom – evt. tryk på påfyldningsventilen med spidsen af en lille skruetrækker eller en anden spids genstand, indtil der ikke er mere tryk i lighteren. Så er den klar til at blive påfyldt.
Drej flammejusteringen så langt ned som muligt. Gasrefillen holdes lodret (meget vigtigt), med gasrefillens ventil pegende ned mod bordlighterens påfyldningsventil, som vender lodret opad. Slut gasrefillens ventil til den tilsvarende åbning i din mignis bordlighter. Pres gasrefillen med et fast jævnt tryk, og udfør 3-5 tryk (ca. 2 sekunder for hvert tryk). Imellem hver tryk, fjernes gasrefillen kort for så at blive påført påfyldningsåbningen igen jf. ovenstående beskrivelse. Lad gerne bordlighteren hvile i 1-2 minutter bagefter, så overskudsgassen kan fordampe. Herefter kan bordlighteren anvendes på ny og flammen justeres til ønsket højde.
Hvis gasrefillen og bordlighteren ikke holdes lodret under påfyldningsprocessen, kan der komme luft ind i den forseglede gasbeholder og et vakuum kan forekomme og forårsage at bordlighteren ikke tænder.
Lightergas er brandfarligt, og isende koldt, når det slipper ud i luften under påfyldning – derfor vær meget omhyggelig med at undgå kontakt med huden.